Coating Supervisor
Coating Supervisor programme must be completed by candidates needing to renew their industry recognised Coating Supervisor ID card


Coating Supervisor programme must be completed by candidates needing to renew their industry recognised Coating Supervisor ID card

Lesson Complete:

Lesson Viewed:


Lesson 1 - Duties of a Supervisor

Objective
To understand the requirements of the supervisor and his or her duties to the employer and employee.

Lesson 2 - Material Health & Safety Data Sheets (Safety Data Sheets)

Objective
To understand the requirements for health and safety data sheets, usually referred to as material safety data sheets, from the coating manufacturers.

Lesson 3 - COSHH Assessment, Risk Assessment and Method Statements

Objective
To understand the requirements of conducting COSHH Assessments, and the obligations of the employer and employees.

Lesson 4 - Painting Specifications

Objective
To understand the basic principles of a painting specification

Lesson 5 - ISO Visual Preparation Standards

Objective
To understand the standards that are developed and used in the coatings industry, specifically the standards used in surface preparation.

Lesson 6 - SSPC VIS 1

Objective
The objective of this training unit is to give a full and comprehensive review of the SSPC-VIS1 Guide titled 'Guide and Reference Photographs for Steel Surfaces prepared by Dry Abrasive Blast Cleaning'.

Lesson 7 - SSPC VIS 3

Objective
The objective of this training unit is to give a full and comprehensive review of the SSPC-VIS 3 Visual Guide titled ‘Guide and Reference Photographs for Steel Surfaces prepared by Power and Hand Tool Cleaning'.

Lesson 8 - SSPC VIS 4 - NACE VIS 7

Objective
The objective of this training unit is to give a complete and comprehensive review of SSPC-VIS 4/NACE VIS 7, titled ‘Guide and Reference photographs for steel surfaces prepared by water jetting’.

Lesson 9 - SSPC VIS 5 - NACE VIS 9

Objective
The objective of this training unit is to give a complete and comprehensive review of the SSPC-VIS 5/NACE VIS 9 visual guide, which is titled “Guide and reference photographs for steel prepared by wet abrasive blast cleaning”

Lesson 10 - Product Data Sheets

Objective
To understand how to read and understand the manufacturer's product data sheet, and the importance of using the product within the manufacturer's guidelines.

Lesson 11 - Basic Paint Technology

Objective
To understand the fundamental constituents and properties of coatings used for corrosion control, and to gain an insight into coating systems.

Lesson 12 - Paint Failure

Objective
The objective of this training unit is to review and understand the main types of coating failures briefly.

Lesson 13 - Inspection and Test Equipment

Objective
The objective of this lesson is to gain an insight into the inspection and testing equipment used in the protective coatings industry.

Lesson 14 - Sustainability in the Protective Coatings Industry

Sustainability in the Protective Coatings Industry